총포ㆍ도검ㆍ화약류 등의 안전관리에 관한 법률 시행령 제8조(제조시설의 기준)
Enforcement Decree of the Act on the Safety Control of Firearms, Swords and Knives, Explosives, etc., Article 8 (Standards for Manufacturing Facilities)
법 제4조제5항에 따른 총포ㆍ도검ㆍ화약류ㆍ분사기ㆍ전자충격기ㆍ석궁의 제조에 관한 시설(이하 "제조시설"이라 한다)의 기준은 다음 각 호와 같다. <개정 1987.11.10, 1990.3.31, 1996.6.20, 1999.6.30, 2001.3.31, 2004.1.20, 2006.3.10, 2008.2.29, 2013.3.23, 2013.10.10, 2014.11.19, 2016.6.30, 2017.7.26, 2018.5.28>
The standards for facilities for manufacturing firearms, swords and knives, explosives, gas sprayers, electric shock devices, and crossbows under Article 4 (5) of the Act (hereinafter referred to as "manufacturing facilities") are as follows:
1. 제조소는 위험구역과 비위험구역으로 구분하되, 위험구역의 주위에는 경계울타리를 설치하고 보기쉬운 곳에 경계판을 설치할 것
1. The manufacturing plant shall be divided into a hazardous area and a non-hazardous area, with a boundary fence installed around the hazardous area and a boundary sign installed in a conspicuous place;
2. 다음 각 목의 요건을 모두 갖춘 작업장이 있을 것
2. There shall be a workshop satisfying all of the following requirements:
가. 다음의 구분에 따른 설비기준에 따라 설비를 갖출 것
(a) Equipment shall be provided according to the equipment standards in the following classification:
1) 총포ㆍ도검ㆍ분사기ㆍ전자충격기ㆍ석궁을 제조(총포의 개조ㆍ수리를 포함한다)하기 위한 작업장[총포신 또는 기관부만 제조하기 위한 작업장(이하 "총포신등 작업장"이라 한다)은 제외한다]의 경우: 별표 3에 따른 설비기준
1) In the case of a workshop for manufacturing (including modifying and repairing firearms) firearms, swords and knives, gas sprayers, electric shock devices, and crossbows [excluding a workshop for manufacturing only gun and cannon barrels or receivers (hereinafter referred to as a "barrel workshop")]: The equipment standards under Attached Table 3;
2) 총포신등 작업장의 경우: 별표 3에 따른 설비기준 중 해당 부품의 제조에 필요하다고 경찰청장이 인정하는 설비기준
2) In the case of a barrel workshop: Among the equipment standards under Attached Table 3, the equipment standards that the Commissioner General of the Korean National Police Agency recognizes as necessary for manufacturing the relevant parts;
나. 다음의 구분에 따른 면적을 갖출 것
(b) The area shall be provided according to the following classification:
1) 총포 및 분사기를 제조하기 위한 작업장(산탄탄알 또는 연지탄만을 제조하기 위한 작업장은 제외한다)의 경우: 전용면적 200제곱미터 이상
1) In the case of a workshop for manufacturing firearms and gas sprayers (excluding a workshop for manufacturing only shotgun shot or lead bullets): An exclusive-use area of at least 200 square meters;
2) 다음의 어느 하나에 해당하는 작업장의 경우: 전용면적 80제곱미터 이상
2) In the case of a workshop falling under any of the following: An exclusive-use area of at least 80 square meters:
가) 도검ㆍ전자충격기 및 석궁을 제조하기 위한 작업장
(a) A workshop for manufacturing swords and knives, electric shock devices, and crossbows;
나) 산탄탄알 또는 연지탄만을 제조하기 위한 작업장
(b) A workshop for manufacturing only shotgun shot or lead bullets;
2의2. 총포를 수리하기 위한 작업장은 전용면적 23.1제곱미터이상이어야 한다. 총포판매업소에서 수리업을 겸업하는 경우에도 또한 같다.
2-2. A workshop for repairing firearms shall have an exclusive-use area of at least 23.1 square meters. The same applies where a firearms sales shop also conducts a repair business;
3. 제1호의 경계울타리가 산림안에 설치된 경우에는 그 경계울타리를 따라 폭 2미터이상의 빈터를 두어 화재시에 연소를 방지할 수 있도록 할 것
3. Where the boundary fence under subparagraph 1 is installed in a forest, a clearing at least 2 meters wide shall be left along the boundary fence so as to prevent the spread of combustion in case of fire;
4. 위험구역안에는 작업상 없어서는 아니될 시설만을 설치할 것
4. Only facilities indispensable for work shall be installed in the hazardous area;
5. 위험공실ㆍ화약류 일시저치장ㆍ일광건조장ㆍ폭발시험장ㆍ연소시험장ㆍ발사시험장 또는 폐약소각장(이하 "위험공실등"이라 한다)은 보안물건과의 사이에 별표 4에 의한 보안거리(꽃불류ㆍ신호염관ㆍ신호화전 또는 이들의 원료용 화약이나 폭약을 취급하는 위험공실등에 있어서는 별표 5에 의한 보안거리)를 둘 것. 다만, 보안물건이 그 제조소의 시설의 일부인 경우에는 행정안전부령이 정하는 거리를 둔다.
5. Hazardous work rooms, temporary explosives holding places, sun-drying yards, explosion test sites, combustion test sites, firing test sites, and waste explosives incinerators (hereinafter referred to as "hazardous work rooms, etc.") shall maintain the safety distance under Attached Table 4 from protected objects (the safety distance under Attached Table 5 for hazardous work rooms, etc. handling fireworks, signal flare tubes, signal fire plugs, or gunpowder or high explosives as raw materials thereof). However, where the protected object is part of the facilities of the manufacturing plant, the distance prescribed by Ordinance of the Ministry of the Interior and Safety shall be maintained;
6. 별표 4 및 별표 5에 규정한 보안거리에 대응하는 정체량을 초과하여 저장하고자 하는 경우에는 다음 산식에 의하여 계산한 보안거리를 둘 것. 다만, 니트로기 3이상을 함유하는 니트로화합물 또는 펜타에리스릿트, 테트라나이트렛트의 초화공실에 있어서는 정체량에 관계없이 제1종 및 제2종 보안물건에 대하여는 100미터, 제3종 및 제4종 보안물건에 대하여는 50미터, 도화선 및 전기도화선의 일시저치장은 저치하는 수량에 관계없이 10미터의 거리를 둔다. [표·그림: 원문 참고] ┌──────────────────────────────────────────┐│ 보안거리 = ││ {분모의 정체량에 대한 보안거리} × {저장하고자 하는 수량의 세제곱근} ││ ────────────────────────────────────││ 별표 4 또는 별표 5에 의한 정체량의 세제곱근 ││ │└──────────────────────────────────────────┘</img>
6. Where storing in excess of the holding quantity corresponding to the safety distance prescribed in Attached Tables 4 and 5, the safety distance calculated by the following formula shall be maintained. However, for a nitration work room for nitro compounds containing three or more nitro groups, or for pentaerythritol or tetranitrate, regardless of the holding quantity, 100 meters shall be maintained from Class 1 and Class 2 protected objects and 50 meters from Class 3 and Class 4 protected objects, and for a temporary holding place for fuses and electric fuses, 10 meters shall be maintained regardless of the quantity held. [Table: Safety distance = (safety distance for the holding quantity in the denominator) x (cube root of the quantity to be stored) / (cube root of the holding quantity under Attached Table 4 or 5)]
7. 위험공실등은 제조소 경계울타리안의 다른 시설에 대하여 행정안전부령이 정하는 보안거리를 둘 것
7. Hazardous work rooms, etc. shall maintain the safety distance prescribed by Ordinance of the Ministry of the Interior and Safety from other facilities within the boundary fence of the manufacturing plant;
8. 기관실 및 연통(고체연료를 사용하지 아니하는 기관의 기관실 및 연통을 제외한다)은 위험구역밖에 설치할 것
8. Engine rooms and chimneys (excluding engine rooms and chimneys of engines that do not use solid fuel) shall be installed outside the hazardous area;
9. 위험공실 및 화약류 일시저치장에는 제41조의 규정에 의한 피뢰장치를 할 것
9. Hazardous work rooms and temporary explosives holding places shall be equipped with lightning protection devices under Article 41;
10. 위험공실은 내화성 건물로 하여 별채로 하고, 폭발할 위험이 있는 공실은 폭발할 때에 가볍게 날리어 흩어질 수 있는 건축자재를 사용할 것. 다만, 행정안전부령이 정하는 방폭식구조 또는 준방폭식구조로 하는 때에는 그러하지 아니하다.
10. Hazardous work rooms shall be fireproof buildings built as separate structures, and work rooms with a risk of explosion shall use building materials that are lightly blown and scattered at the time of explosion. However, this does not apply where they are of an explosion-proof structure or semi-explosion-proof structure prescribed by Ordinance of the Ministry of the Interior and Safety;
11. 폭발할 위험이 있는 공실 및 화약류 일시저치장에는 제42조의 규정에 의한 흙둑을 설치할 것. 다만, 방폭식구조 또는 준방폭식구조로 된 공실에 있어서는 방폭면이 아닌 방향에는 흙둑을 설치하지 아니할 수 있으며, 화약 또는 폭약을 원료로 하여 꽃불류ㆍ신호염관 및 신호화전만을 제조하는 제조소(이하 "꽃불류등의 제조소"라 한다)에 있어서는 피뢰장치를 하지 아니하고 제43조의 규정에 의한 간이흙둑 또는 행정안전부령이 정하는 방폭벽으로 흙둑에 갈음할 수 있다.
11. Work rooms with a risk of explosion and temporary explosives holding places shall have earth embankments under Article 42. However, for work rooms of an explosion-proof structure or semi-explosion-proof structure, no earth embankment need be installed in directions other than the blast-resistant side, and for manufacturing plants that manufacture only fireworks, signal flare tubes, and signal fire plugs using gunpowder or high explosives as raw materials (hereinafter referred to as "fireworks manufacturing plants, etc."), a lightning protection device need not be installed and a simple earth embankment under Article 43 or a blast-resistant wall prescribed by Ordinance of the Ministry of the Interior and Safety may be substituted for the earth embankment;
12. 불이 날 위험이 있는 공실은 다른 공실과의 사이에 방화벽 그밖의 연소를 방지할 수 있는 시설을 할 것
12. Work rooms with a risk of fire shall have fire walls or other facilities capable of preventing the spread of combustion between them and other work rooms;
13. 불이 날 위험이 있는 공실안의 불이 날 위험이 있는 시설에는 자동식 또는 물통반전식등의 소화설비를 할 것
13. Facilities with a risk of fire in work rooms with a risk of fire shall be provided with fire extinguishing equipment such as automatic or water-bucket-tilting types;
14. 위험공실의 부근에는 저수지ㆍ저수조ㆍ비상전등등 불을 끄는데 필요한 설비를 갖출 것
14. Equipment necessary for fire fighting, such as reservoirs, water storage tanks, and emergency lighting, shall be provided near hazardous work rooms;
15. 위험공실에는 비상시의 피난에 이용하도록 창과 출입구를 만들고 문을 밖으로 여는 식으로 하며, 금속류가 서로 마찰되는 부분에는 구리 또는 놋쇠를 사용하고 직사광선을 받는 부분의 유리는 불투명한 것을 사용할 것
15. Hazardous work rooms shall have windows and entrances for use in emergency evacuation, with doors opening outward, copper or brass shall be used for parts where metals rub against each other, and opaque glass shall be used for parts exposed to direct sunlight;
16. 위험공실의 내부에는 흙이나 모래가 떨어지거나 날리어 흩어지는 것을 방지할 수 있는 구조로 하고 마루에는 철물류가 나타나지 아니하도록 할 것
16. The interior of hazardous work rooms shall be structured to prevent soil or sand from falling or scattering, and metal objects shall not be exposed on the floor;
17. 위험공실의 마루에는 납판ㆍ고무판등의 부드러운 재료로 밀착시켜 화약류의 가루가 침투되지 아니하도록 할 것. 다만, 전기뇌관 제조소와 꽃불류등의 제조소의 마루는 판자로 할 수 있다.
17. The floors of hazardous work rooms shall be closely covered with soft materials such as lead plates or rubber plates so that explosives dust does not penetrate. However, the floors of electric detonator manufacturing plants and fireworks manufacturing plants, etc. may be made of boards;
18. 위험공실안에는 원동기와 온도 및 습도의 조정장치를 설치하지 아니할 것. 다만, 폭발 또는 불이 날 염려가 없는 경우에는 그러하지 아니하다.
18. Motors and temperature and humidity control devices shall not be installed in hazardous work rooms. However, this does not apply where there is no risk of explosion or fire;
19. 위험공실안에 설치 또는 비치하는 기계 및 용기는 작업상 부득이한 부분외에는 철물류가 서로 마찰되지 아니하도록 하고, 마찰되는 부분에는 충분히 윤활제를 발라 동요ㆍ탈락ㆍ부식등을 방지하도록 하며, 화약류의 가루가 달라 붙거나 스며들지 아니하도록 할 것
19. For machines and containers installed or kept in hazardous work rooms, except where unavoidable for work, metal objects shall be prevented from rubbing against each other, sufficient lubricant shall be applied to rubbing parts to prevent shaking, detachment, corrosion, etc., and explosives dust shall be prevented from adhering or penetrating;
20. 위험공실안의 난방장치는 증기ㆍ열기 또는 온수로 하되, 불에 타기 쉬운 물건과 사이를 띄우고 그 뜨거운 면에 화약류의 가루ㆍ먼지등이 달라 붙는 것을 방지하도록 할 것
20. Heating devices in hazardous work rooms shall use steam, hot air, or hot water, shall be kept apart from combustible articles, and shall prevent explosives dust, dirt, etc. from adhering to their hot surfaces;
21. 위험공실안의 파라핀조ㆍ유황통등에 전열기 그밖의 높은 열원을 사용하는 경우에는 그 통밖에 섭씨 110도(유황통에 있어서는 섭씨 150도)를 넘지 아니하도록 안전장치를 할 것
21. Where an electric heater or other high heat source is used for paraffin baths, sulfur vats, etc. in hazardous work rooms, a safety device shall be installed so that the temperature outside the vat does not exceed 110 degrees Celsius (150 degrees Celsius for sulfur vats);
22. 위험공실 또는 화약류 일시저치장의 조명설비는 공실안과 완전히 떨어지게 설계된 전등으로 하고, 그 공실 또는 화약류 일시저치장안에는 전기줄이 나타나지 아니하도록 할 것
22. Lighting equipment of hazardous work rooms or temporary explosives holding places shall be lamps designed to be completely separated from the inside of the work room, and electric wires shall not be exposed in the work room or temporary explosives holding place;
23. 위험공실안에 설비된 기계 또는 건조장치의 금속부분은 땅바닥에 닿게 할 것
23. Metal parts of machines or drying devices installed in hazardous work rooms shall be grounded;
24. 위험공실등에는 내부 또는 외부의 보기 쉬운 곳에 현재 저치된 화약류 및 화약원료의 종류ㆍ정체량, 동일장소에 저치할 수 있는 화약류의 종류, 최대수량, 정원 및 취급상의 주의 그밖의 필요한 사항을 게시할 것
24. Hazardous work rooms, etc. shall display, in a conspicuous place inside or outside, the types and holding quantities of explosives and explosives raw materials currently held, the types and maximum quantities of explosives that may be held in the same place, personnel capacity, handling precautions, and other necessary matters;
25. 화약류가 날리어 흩어질 염려가 있는 공실의 천정 및 안쪽벽은 간격이 없도록 하고, 물로 닦을 수 있도록 표면을 미끄럽게 할 것
25. The ceilings and inner walls of work rooms where explosives may be scattered shall have no gaps and their surfaces shall be smooth so that they can be wiped with water;
26. 불이 붙기 쉬운 가스 또는 독기가 있는 가스가 발산할 염려가 있는 공실에는 가스의 배기장치를 할 것
26. Work rooms where flammable gas or toxic gas may be emitted shall be equipped with gas exhaust devices;
27. 화약류의 건조작업을 하는 제조소에 있어서는 건조하는 공실을 둘 것. 다만, 도화선의 제조소 또는 꽃불류등의 제조소에 있어서는 일광건조장으로 이에 갈음할 수 있다.
27. A manufacturing plant that performs drying work of explosives shall have a drying work room. However, for fuse manufacturing plants or fireworks manufacturing plants, etc., a sun-drying yard may substitute;
28. 화약류를 건조하는 공실안의 가온장치는 건조중에 있는 화약류와 거리를 띄워서 설치할 것. 다만, 온수가온장치로서 그 온도가 건조온도와 비슷할 때에는 그러하지 아니하다.
28. Heating devices in drying work rooms for explosives shall be installed at a distance from the explosives being dried. However, this does not apply where it is a hot water heating device and its temperature is similar to the drying temperature;
29. 일광건조장의 건조대는 60센티미터이상의 높이로 할 것
29. The drying rack of a sun-drying yard shall be at least 60 centimeters high;
30. 불이 날 위험이 있는 일광건조장과 다른 시설간의 거리가 20미터미만인 때에는 그 시설과의 사이에 제43조의 규정에 의한 간이흙둑 또는 행정안전부령이 정하는 방폭벽을 설치하고, 불이 날 위험이 있는 일광건조장과 다른 시설과의 거리가 20미터이상인 때에는 그 시설간의 사이에 방화벽을 설치하거나 상록활엽수를 빽빽하게 심을 것
30. Where the distance between a sun-drying yard with a risk of fire and other facilities is less than 20 meters, a simple earth embankment under Article 43 or a blast-resistant wall prescribed by Ordinance of the Ministry of the Interior and Safety shall be installed between it and those facilities, and where the distance between a sun-drying yard with a risk of fire and other facilities is 20 meters or more, a fire wall shall be installed or evergreen broadleaf trees shall be densely planted between those facilities;
31. 폭발시험장ㆍ연소시험장ㆍ발사시험장 및 폐약소각장은 위험구역안에 설치하고, 흙둑방폭벽 또는 방화벽으로 구획하여 그 주위의 수목, 잡초등을 항상 벌채할 것
31. Explosion test sites, combustion test sites, firing test sites, and waste explosives incinerators shall be installed in the hazardous area, partitioned by earth embankment blast-resistant walls or fire walls, and the trees, weeds, etc. around them shall be cut at all times;
32. 화약류 및 그 원료를 운반하는 용기는 그 안에 넣는 물건과 화학작용을 일으키지 아니하는 부드러운 재료를 사용하고 확실하게 뚜껑을 덮을 수 있는 구조로 할 것
32. Containers for transporting explosives and their raw materials shall be made of soft materials that do not cause chemical reactions with the articles put into them and shall be structured so that lids can be securely closed;
33. 위험구역안에서 화약류를 운반하는 운반용차는 손수레ㆍ축전지차 또는 디젤차로 하되, 손수레는 운반하는 화약류에 마찰 및 충격을 일으키지 아니하는 구조로 하고, 축전지차 및 디젤차는 행정안전부령이 정하는 구조로 할 것
33. Transport vehicles that carry explosives within the hazardous area shall be handcarts, battery-powered vehicles, or diesel vehicles, and handcarts shall be structured so as not to cause friction or impact to the explosives transported, and battery-powered vehicles and diesel vehicles shall be structured as prescribed by Ordinance of the Ministry of the Interior and Safety;
34. 초유폭약 또는 함수폭약등 수분 또는 유분을 함유하는 화약류의 제조소에 있어서는 자동식 제조시설을 갖출 것
34. A manufacturing plant for explosives containing moisture or oil, such as ANFO explosive or water-gel explosive, shall be equipped with automatic manufacturing facilities;
35. 초유폭약 또는 함수폭약 등 수분 또는 유분을 함유하는 화약류를 사용장소에서 제조하는 경우에는 자동혼화탱크로리차에 의하여야 하며, 제조한 후에는 그 차량을 제조소 안에 보관시킬 것
35. Where explosives containing moisture or oil, such as ANFO explosive or water-gel explosive, are manufactured at the place of use, an automatic mixing tank truck shall be used, and after manufacture, the vehicle shall be kept within the manufacturing plant.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2026.3.24 · 대통령령 · 경찰청 소관